Product ID: EY-32B |
|
Precision Drill Sharpener ( EY-32B)
Precision Drill Sharpener- The drill sharpener is mainly applied to 1. CNC lathe 2. CNC Machining Center 3 Die Making.
Break Through Agaon in Technology of Drill Sharpener Quick and Precise
1.Cam device:This machine comes with four cams ranging from no.1 to no.4.Simply change the cam when grinding to grind drill,end mill cutter,chamfering cutter,tap,center drill and etc.
2.Drill positioning device:Grind drill of different diameters by adjusting the graduation according to the desired diameter and placing any cutting edge of the drill parallel to the positioning device.This method appllies to all other.
3.The firest one created that moves in up-down vibration to sharpen drills.Use a chuck to clamp drill that can up and down vibration,and automatically change angles to sharpen front edge angles,debris angle,slice drills and still center point can be clamp together and can be sharpened together in one process.It display a hogh effciency and high precision sharpening drills.
4.Adjusting button for rake angle of drill:The adjusting button controls the size of rake angle of the drill.When sharper edge is desired,turn more of the number-controlled button to get a greater graduation reading so as to have a sharper edge ground.
For any further information, please go to website:http://www.eyan.com
Precision Drill Sharpener
| Measurements |
Standard Attachments |
| Sharpening Range: Ø1.5 ~ Ø32mm |
European type electrical contorl including stand and cooling apparatus. |
| Front Edge Angle: 40° ~ 180° |
(CBN) Diamond grinding wheel (1 set / 2pieces). |
| Back Rake Angle: 0° ~ 18° |
For single blade of chamfering tools use No.1 cam. |
| Motor: 1/2 HP |
Sharpen drills use No.2 cam. |
| Ploygon 150 x 25 x 31.75mm / Disk 125 x 21 x 31.75mm |
For third blade of chamfering tools and screw tap use No.3 cam. |
| Weight Net Gross Weights: 177kg / 210kg |
Drill's fourth blade screw topping attack, use No.4 cam. |
| Crate Size: 91 x 83 x 162cm |
Chuck, six-jaw auto centering. |
| - |
Grinding wheel and attached weights |
| - |
M-type sleeve MT2, MT3 |
| - |
Quartz lamp |
| - |
Operation Manual and Demonstration CD |
| - |
General tools |
| - |
Electric motor device |
| - |
Governor |
|
|
| |
|
|
|
|
